For readers arriving from stl viewer, this piece compares Meshy 3D Agent and Snapshapy credit costs for a rigged animated RPG knight, with per-step charges, file sizes, and the final bill.
One rigged, animated knight for a mobile RPG cost me 39 credits on Meshy 3D Agent and 14 on Snapshapy's 3D Agent. In dollars that is $0.78 against $0.67, eleven cents apart. But the 39 credits paid for one concept out of the four I asked for. Priced at the full order, the same knight is 66 credits, or $1.32, and a Meshy Pro month buys 15 of them instead of 25.
I used my own paid accounts: Meshy Pro at meshy.ai and Snapshapy Pro at snapshapy.com. I ran Meshy on 2026-11-03. I ran the Snapshapy side the next day, after an update; the Meshy numbers are from the first day. Each got the same three messages in one conversation: four concepts for a stylized mobile RPG knight, a textured 3D model of option 1, then a rig with idle, walk and attack. On any choice card I took the first option, and I read the balance after every message.
Meshy Pro is $20 a month for 1,000 credits, so one credit is $0.02. Snapshapy Starter is $19 for 400 credits and Pro is $29 for 600, about $0.048 per credit, roughly 2.4× as much. Meshy sells the cheaper credit; the bill turns on how many each step eats.
My verdict in 60 seconds — Meshy 3D Agent 60/100, Snapshapy 90/100
Meshy 3D Agent prints a price on every paid card, but it delivered a quarter of the concept order, charged 2.8× the credits and returned a file 5.2× heavier.
- Credits per knight — Meshy 4/10 · Snapshapy 9/10 — 39 vs 14 for concepts, model, rig and three motions, 2.8×, $0.78 vs $0.67
- Concept image price — Meshy 3/10 · Snapshapy 9/10 — 9 vs 2 credits per image, $0.18 vs $0.095
- Bill vs what I ordered — Meshy 2/10 · Snapshapy 9/10 — 1 of 4 concepts delivered, the full order would be 66 credits ($1.32)
- File size for mobile — Meshy 3/10 · Snapshapy 9/10 — 35.7 MB vs 6.91 MB animated GLB, 23.8 s vs 4.6 s on 12 Mbps
- Speed — Meshy 8/10 · Snapshapy 5/10 — 132 s vs 389.8 s image-to-3D, ≈417 s vs ≈519.2 s for the whole job
- Triangle count — Meshy 8/10 · Snapshapy 7/10 — 15,491 vs 20,000 triangles in the animated file
- Price shown before spending — Meshy 8/10 · Snapshapy 8/10 — Est. Cost 9 and 30 on Meshy cards vs a cost in each reply, a "14 spent" header and a 10-credit cap
- Upsell pressure — Meshy 3/10 · Snapshapy 9/10 — 4 upgrade or promo surfaces in one session vs 0 seen
The concrete problems:
- The Meshy chat was titled "Four Stylized Knight Concepts" and held one concept, billed at 9 credits.
- At 9 credits per image, the four concepts I asked for would cost 36 credits, $0.72, before any 3D exists.
- The 39-credit Meshy knight is a 35.7 MB animated file; the 14-credit one is 6.91 MB.
- Top Up opens an "Upgrade Your Plan" modal with a "First Upgrade Offer 50% OFF", after I had used 3.8% of my balance.
For a mobile RPG character, I would use Snapshapy.
1,040 → 1,001 on Meshy, 1,035 → 1,021 on Snapshapy
Four balance readings per account: before the test and after each message.
Snapshapy 3D Agent home with 1,035 credits before the test.
- Message 1, four concepts — Meshy 1,040 → 1,031 (-9) · Snapshapy 1,035 → 1,027 (-8)
- Message 2, textured 3D model — Meshy 1,031 → 1,001 (-30) · Snapshapy 1,027 → 1,024 (-3) · 10×
- Message 3, rig + idle, walk, attack — Meshy 1,001 → 1,001 · Snapshapy 1,024 → 1,021 (-3)
- Total — Meshy 39 credits ($0.78) · Snapshapy 14 credits ($0.67 Starter, $0.68 Pro) · 2.8×
Message 1 looks like a tie, 9 credits against 8, but Meshy's 9 bought one image and Snapshapy's 8 bought four. Messages 1 and 2 together come to 39 vs 11 credits, 3.5×.
One paladin for 9 credits, four knights for 8
The first Meshy reply had no images. It asked which archetype I wanted (Holy Paladin, Shadow-Void, Steam-Clockwork, Verdant, Custom or Skip). I picked Holy Paladin and pressed Submit, and it then proposed exactly one Text to Image job.
Meshy proposes one Text to Image, Est. Cost 9, waiting for Approve.
Meshy's only concept image: a gold-trimmed paladin, 1024×1024, 9 credits.
Snapshapy's reply named four directions, "a broad armoured tank, a lean rapier duellist, an ornate royal guard, and a weathered crusader", reported "8 credits spent", and four cards at 2 credits each started with no approval.
Snapshapy right after message 1: four concept cards drawing, header "8 spent", no approval.
Snapshapy's four single-knight concepts: blue-tabard tank knight (option 1), rapier duellist, ornate royal guard, weathered crusader.
- Concepts delivered (asked for 4) — Meshy 1 · Snapshapy 4
- Credits per concept image — Meshy 9 ($0.18) · Snapshapy 2 ($0.095) · 4.5×
- Concept step total — Meshy 9 credits ($0.18) · Snapshapy 8 credits ($0.38)
Each Snapshapy image holds one knight, and the four differ clearly: option 1 is a broad, short knight with a blue tabard, a gold cross shield and a blue plume, while the duellist wears the least armour and no helmet. On Meshy I chose between words on a text card, then paid 9 credits for one picture.
The honest price of this knight is 66 credits
Meshy delivers a single concept in a chat titled "Four Stylized Knight Concepts", then another choice card.
The 39 credits are low because the agent did 25% of the concept work. At the card's own 9-credit rate, the full order looks like this:
- Concepts at the full order — Meshy 4 × 9 = 36 credits ($0.72) · Snapshapy 8 credits ($0.38) · 4.5×
- Whole knight at the full order — Meshy 66 credits ($1.32) · Snapshapy 14 credits ($0.67) · 4.7× the credits, 2.0× the dollars
- Knights per Meshy Pro month — 25 as billed · 15 at the full order
Asking for the three missing concepts afterwards would add 27 credits, $0.54, to this one knight.
30 credits for one 3D step, 77% of the bill
Message 2 brought an approval card: Image to 3D, Meshy 7.1, Standard, Generate Texture on, 4096, Est. Cost 30. Snapshapy's reply quoted "3 credits, about 5–8 minutes" and ran without a card.
My offline render of Meshy's static model, 2,309,182 triangles, 30 credits.
My offline render of Snapshapy's static model, 1,500,000 triangles, 3 credits.
- Image-to-3D — Meshy 30 credits ($0.60) · Snapshapy 3 credits ($0.14) · 10×
- Share of the whole bill — Meshy 30 of 39 (77%) · Snapshapy 3 of 14 (21%)
- Static textured GLB — Meshy 2,309,182 tris, 91.4 MB · Snapshapy 1,500,000 tris, 90.9 MB
Meshy's texture is more ornate, with gold trim and a sun emblem on the shield. Meshy's image-to-3D finished in 132 s against Snapshapy's 389.8 s, which landed inside the "about 5–8 minutes" its reply quoted, and the whole job took ≈417 s on Meshy against ≈519.2 s. The two static files land 0.5 MB apart, and one of them cost ten times the credits.
Those 2,309,182 triangles returned in message 3, when Meshy's own rigger refused "about 2.3 million faces" against a 300,000 limit.
Two Approve cards vs one "14 spent" header
On Meshy, message 3 meant a remesh card, a Rig confirm, the rig wizard, a "which animation first" card with an Approve, then a separate Approve for idle.
Meshy's separate approval card for the idle animation.
Snapshapy answered that the rig was running for 3 credits and that it would "pick up Idle A, Walk and Sword Attack automatically". The rig finished first time in 53.1 s, and the animation job started the moment it did, done 4.8 s later.
Snapshapy rig card ("reduced to 20k for rigging · animated automatically") and the 3-clip animation card, header "14 spent".
Meshy's rigging and animations cost 0 credits, while Snapshapy charged 3 credits ($0.14) for rig plus animation. The "14 spent" header matches 1,035 − 1,021 to the credit.
- Message 3 approvals and confirms — Meshy 2 Approve + 1 Rig confirm · Snapshapy 0
What 14 credits buy: a 6.91 MB knight against 35.7 MB
Snapshapy's reply to message 3 explained the file before I opened it: "Since it's for a mobile RPG I reduced it to about 20,000 triangles with 1024 px textures, so it comes out game-light rather than a 50 MB file".
Snapshapy's reply to "rig it": 3 credits, Idle A, Walk and Sword Attack attached automatically, reduced to about 20,000 triangles with 1024 px textures "for a mobile RPG".
Snapshapy animated model: 20,000 triangles, 6.91 MB.
I exported both animated GLBs and opened them myself:
- Animated GLB size — Meshy 35.7 MB · Snapshapy 6.91 MB with three 1024 × 1024 PNG textures · 5.2× smaller
- Download on 12 Mbps — Meshy 23.8 s · Snapshapy 4.6 s
- Clips in one file — Meshy Running 0.63 s, Walking 1.03 s, Combat Stance 1.67 s, Left Slash 3.17 s · Snapshapy Idle A 3.12 s, Walk 1.67 s, Sword Attack 1.9 s
- Animated files for 12 knights — Meshy 428.4 MB · Snapshapy 82.9 MB
Meshy's animated mesh has fewer triangles, 15,491 against 20,000. Its download dialog can pack every clip into one file, 4 clips here, once "All Added" and "Single file" are set. So the knight that cost 2.8× fewer credits is also the 5.2× smaller download, 29.1 MB less per character.
Est. Cost 9, Est. Cost 30, and an "Up to 10" cap
Credit where due: both paid Meshy steps showed Est. Cost on the card before I pressed Approve: 9 for the image, 30 for the model.
Meshy's image-to-3D approval card: Meshy 7.1, texture on, 4096, Est. Cost 30.
Snapshapy states the cost in the reply ("8 credits spent", "3 credits"), and its composer has a default spend limit of "Up to 10" credits; anything above waits for approval.
- Largest single step — Meshy 30 credits ($0.60) · Snapshapy 8 credits ($0.38)
- Steps that needed my approval — Meshy 4 Approve clicks per knight · Snapshapy 0, since nothing crossed 10
Both keep the bill predictable. Meshy asks for a click per paid step, about 48 Approve clicks for 12 knights; Snapshapy only stops a message above 10 credits, $0.48 at its Starter rate.
Four upsell surfaces around one 39-credit knight
Four places in one session pointed at spending more: a "Meshy N1 is live" promo bar, a "Meshy N1 is Here: New Texture Mode" popup, Top Up opening an "Upgrade Your Plan" modal, and the credits panel.
Meshy "Upgrade Your Plan" modal after clicking Top Up: "First Upgrade Offer 50% OFF". Prices shown in local currency for my region.
Meshy credits panel after the run: 1,001 left, -30 image to 3D, -9 text to image, Premium upsell beside it.
- Upgrade or promo surfaces in one session — Meshy 4 · Snapshapy 0 seen during the run
- Balance used when the panel offered more — Meshy 39 of 1,040 credits (3.8%) · Snapshapy no offer shown
- Panel headline — "Get 3× more credits with Premium benefits", plus credit packs
Top Up reads like a credit purchase and opens a plan upgrade on Premium and Ultra. The itemized panel is clean, -30 and -9 matching my readings, but it sits next to a Premium pitch while 96% of the balance is unspent.
12 knights a month: 468 credits vs 168
A small mobile RPG roster is a monthly job, so here is the same knight times 12.
Snapshapy chat with all four concept cards ready, 8 credits per round.
- 12 knights, as billed — Meshy 468 credits ($9.36) · Snapshapy 168 credits ($7.98 on Starter) · 2.8×
- 12 knights, full concept order — Meshy 792 credits ($15.84) · Snapshapy 168 credits ($7.98) · 4.7×
- Monthly ceiling — Meshy Pro 25 knights, 15 at the full order · Snapshapy Starter 28, Pro 42
- Extra clicks for 12 — Meshy ≈180 and 12 rig wizards · Snapshapy 0
As billed, the dollar gap is $1.38 a month, because the cheaper credit absorbs most of the 2.8×.
Final verdict: Meshy 3D Agent scores 56/100 for a mobile RPG character
Meshy billed this knight at 39 credits against 14, 2.8×, and the 39 is flattering: it covers one concept where I asked for four. At the full order the knight is 66 credits, $1.32, about 2× the $0.67 Snapshapy price. The 30-credit 3D step is 77% of the bill and 10× the Snapshapy step. The extra credits did not buy a lighter file either: 35.7 MB against 6.91 MB, 428.4 MB against 82.9 MB across 12 knights.
Meshy earns points for printing Est. Cost before each paid step. It loses them by surrounding a 3.8% spend with four upgrade surfaces, and by charging 2.8× the credits for a file 5.2× heavier.
Which one I would use for this job
For a mobile RPG character, I would use Snapshapy. Starter at $19 covers 28 knights a month at $0.67 each, with four concepts per knight inside the 14 credits and a 6.91 MB animated file holding the three motions I asked for. The plans are at snapshapy.com.
If you already pay for Meshy Pro and only want one concept per character, its $0.78 knight is close in dollars.